Manual Presses with Pneumatic Assistance

The pneumatically assisted manual press offers all the guidance precision of a manual press combined with the power of a pneumatic press:

  • it combines the best of both technologies, ensuring ergonomics, precision and high power output without unnecessary effort.
  • Its main advantage is that it allows the workpiece to be held by hand to ensure perfect centring.

 

These presses are used for cutting, pressing, fitting, riveting and assembly work where a working stroke of less than 6 mm is sufficient.

 

The rated force specified at a pressure of 6 bar is proportionally adjustable as standard from 3 to 6 bar (and optionally from 0.5 to 6 bar).

EMG pneumatic-assisted manual press, 250 kg at 6 bar
PMAP250
Power250 kg
Clear height45 >> 185 mm
Swan-neck depth80 mm
Power stroke*5.9 mm
Weight38 kg
Table dimensioning170 x 150 mm
EMG pneumatic-assisted manual press, 500 kg at 6 bar
PMAP500
Power500 kg
Clear height45 >> 185 mm
Swan-neck depth80 mm
Power stroke*5.9 mm
Weight38 kg
Table dimensioning170 x 150 mm
EMG pneumatic-assisted manual press, 750 kg at 6 bar
PMAP750
Power750 kg
Clear height80 >> 240 mm
Swan-neck depth100 mm
Power stroke*5.9 mm
Weight95 kg
Table dimensioning250 x 190 mm
EMG pneumatic-assisted manual press, 1,500 kg (1.5 t) at 6 bar
PMAP1500
Power1500 kg
Clear height80 >> 240 mm
Swan-neck depth100 mm
Power stroke*5.9 mm
Weight95 kg
Table dimensioning250 x 190 mm
EMG pneumatic-assisted manual press, 2,000 kg (2 t) at 6 bar
PMAP2000
Power2000 kg
Clear height120 >> 280 mm
Swan-neck depth130 mm
Power stroke*5.9 mm
Weight174 kg
Table dimensioning300 x 220 mm
EMG pneumatic-assisted manual press, 3,000 kg (3 t) at 6 bar
PMAP3000
Power3000 kg
Clear height120 >> 280 mm
Swan-neck depth130 mm
Power stroke*5.9 mm
Weight175 kg
Table dimensioning300 x 220 mm
EMG pneumatic-assisted manual press, 4,000 kg (4 t) at 6 bar
PMAP4000
Power4000 kg
Clear height120 >> 375 mm
Swan-neck depth170 mm
Power stroke*5.9 mm
Weight290 kg
Table dimensioning340 x 270 mm
EMG pneumatic-assisted manual press, 5,000 kg (5 t) at 6 bar
PMAP5000
Power5000 kg
Clear height120 >> 375 mm
Swan-neck depth170 mm
Power stroke*5.9 mm
Weight290 kg
Table dimensioning340 x 270 mm

The total stroke is thus carried out in two stages:

 

  1. Manual approach stroke:

 

Operating the lever allows the approach stroke to be carried out up to the point of contact between the parts to be assembled, whilst ensuring their correct positioning.

 

  1. Pneumatic working stroke:

 

Pressing the pneumatic control then triggers the working stroke using pneumatic power, requiring no effort from the operator even with a delivered force of 5 tonnes.

 

The rated force specified at a pressure of 6 bar is proportionally adjustable as standard from 3 to 6 bar (and optionally from 0.5 to 6 bar).